Workflow for Weddings
(Excerpted from post on Capture One Pro) - on user request
Bottom line - My workflow:
1) Shoot RAW+JPG. RAW to Card 1 JPG to Card 2. I can always hand off
the JPG card to anyone for them to use immediately if necessary.
2) IMPORT : Photo Mechanic
3) EDIT : Capture One Pro 8
Use Sessions so that I can edit in original directories and not have a
huge catalog. Also, if I really need to use Photoshop or another plugin
because I have a solution that I have used in the past I can.
4) SEND Proofs: Smugmug
5) PRINT: Imageprint
to my Epson 3880. To really get good proofs and understand printing you
need to use a good printer. To not waste time figuring out print
profiles (because you are in the photography and not the printing
business) let Imageprint figure out the perfect color, paper, and ink
settings for you.
Don't use Catalogs!:
Use Sessions
But - leave the files right where they are when you import. Don't import files into Capture one. Just access them in the file browser.
Lightroom, iPhoto, and Aperature use a Catalog. Capture One Pro 8
can use catalogs as well. But - even better, with Adobe Bridge or Capture One Pro you can just look in a
directory at the files. There is absolutely no need to import your
photos into some ridiculously huge, slow and unstable catalog. I have
always edited files in the directory, avoiding catalogs. I usually
import my photos with Photo Mechanic
the worlds fastest import and file viewer. I set up a hierarchy of
directories for my files starting with date. (2014_09_17 Mary and John
Smith Wedding) I can then cull down my photos to only the selects that I
can then edit. I used to use Photoshop through Bridge and Adobe Camera
RAW. (Now all of that has gone creative cloud and is far too unwieldy,
slow and expensive.) A full 8 hour plus wedding set on the D4s and D810
takes only 1 hour to cull, and at most 3 hours to edit in post for the
proof prints. (No. I am not kidding. Just ask Emily Karcher of Emily Karcher Photography
if you need a real person that can attest to this. (Don't buy into
something that you only see or hear online. A lot of what you see is
staged (models for "Wedding Shoots") and for advertising.))
How is it so fast. Two things:
1) Cull down your photos into selects first
2) Do not import into a Catalog - Use the files in a directory where they are.
Cull down your photos into selects first. Select the photo's you like, rate them etc in Photo Mechanic.(2014_09_17
Mary and John Smith Wedding) Then move them or copy them into a
Selects directory under that main directory. (2014_09_17 Mary and John
Smith Wedding/Selects) Open the Selects directory in Capture One Pro and
do your editing and corrections. Then export your photos to the Send
directory. (2014_09_17 Mary and John Smith Wedding/Send)If I still need
to do some crazy edits in Photoshop I can do that on the Selects or Send
files.
If you shoot a monster like the Nikon D810, Canon 5D Mark III, or any
medium format camera you know how big those files are. If you cull down
your files first and then don't use catalogs, you will only have the
photos that you need to edit in memory or in your sorted directory. This
is so much faster than asking your computer to look at a 40GB directory
fill of 40MB files. (Or worse - One giant 200GB Catalog containing not
only this shoot, but several of the last ones. Keep in mind that
anything over 4GB in size is a royal pain for a computer. Just try to
copy a giant video file some time.) I do my editing on a 2008 Macbook
Pro with 8GB of RAM. (I needed the RAM for 3D graphics and rendering.)
Do not import into a Catalog - Use the files in a directory where they are.
Using the files in the directory where they are you can edit your
selects with whatever external editor or plugin that you want.Using a
Catalog forces you to waste time, importing and exporting with no added
benefit. Also archiving is easy. Just grab the entire directory
(2014_09_17 Mary and John Smith Wedding), back it up to both of your
spare backup drives (BOTH!) and then delete the 40 GB monster
(2014_09_17 Mary and John Smith Wedding) from your computer's hard
drive. A Catalog keeps growing and growing and becomes overly
cumbersome. (Plugins are quickly becoming stand alone apps now that
don't require Photoshop.
Awesome! Now you can process files with your favorite settings
automatically in batches without the $700 purchase of Photoshop with Bridge.)
Showing posts with label tethering. Show all posts
Showing posts with label tethering. Show all posts
Wednesday, September 17, 2014
Tuesday, November 20, 2012
Nikon D4 Wireless Tethering
People have asked me about linking the new Nikon D4 wirelessly without resorting to the Nikon WT-5a, due to its high cost. (Note: The Nikon WT-5a has dropped in price to around $600.)
What I use is the Netgear WNCE2001
The Netgear WNCE2001 is easy to set up, following the standard directions. (utilizing the HTTP plugin configuration and not the push a button autosetup. Basically you shut off your computer's wireless card and then plug in the Netgear WNCE2001 with an ethernet cable. Then you start any browser and you are sent immediately to the Netgear WNCE2001 configuration. It is just like logging onto your network as you would with your wireless card. Once it logs onto your network, it will remember the settings and use those settings when you plug it into your Nikon D4. (Note: I use the standard network setup through a router and not ad-hoc. I have had too many problems with disconnections while using ad-hoc mode to make it worth using.)
To power the Netgear WNCE2001 I use a Mophie Powerstation Gen 2, which works flawlessly.
I just plug the Netgear WNCE2001 into the ethernet port on the Nikon D4. I then plug the Netgear WNCE2001 into the Mophie Powerstation Gen 2 and push the button on the side to power it up. It works just like I have and ethernet cable directly connected. The speed is somewhat slower than with the ethernet cable connected, but it is very usable for photos.
What software do I use?
Well my favorite is Capture One Pro 7 you can check out my earlier post here. Capture One Pro 7 is updated and controls the Nikon D4 wirelessly, with ethernet, or USB. I also use Camera Control Pro from Nikon. (I did install the Wireless Transmitter Utility from Nikon, which is covered in the Nikon D4 manual. there is also a decent tutorial here) Capture One Pro 7 allows me to control the camera from either inside of Capture One Pro 7 or from the camera. This is much better than other applications which take over the camera and do not allow me to shoot as I normally would with camera in hand. It can be very frustrating to miss the perfect shot because you can't just take it because you have to run over to the computer to get the camera to fire.
Another piece of software that I use is onOne's DLSR Camera Remote Pro. This allows me to control the camera from an iPhone or with onOne's DLSR Camera Remote HD and iPad. The Ipad interface is the more usable of the two. It allows me to have Liveview video or still photos streaming to the iPad. I can see what the camera is seeing, focus, adjust settings and shoot or record - all from the iPad. It works really well for family portraits when the photographer has to be in the photo. One example view is shown at the bottom of the page here.
While the setup with Netgear WNCE2001 and Mophie Powerstation Gen 2 are much larger than the Nikon WT-5a, they are also much cheaper and can be used on any ethernet ready device. I may try the Nikon WT-5a sometime in the future when it drops in price to a more reasonable $300 or so.
(Another option is the D-Link DAP-1350)
What I use is the Netgear WNCE2001
The Netgear WNCE2001 is easy to set up, following the standard directions. (utilizing the HTTP plugin configuration and not the push a button autosetup. Basically you shut off your computer's wireless card and then plug in the Netgear WNCE2001 with an ethernet cable. Then you start any browser and you are sent immediately to the Netgear WNCE2001 configuration. It is just like logging onto your network as you would with your wireless card. Once it logs onto your network, it will remember the settings and use those settings when you plug it into your Nikon D4. (Note: I use the standard network setup through a router and not ad-hoc. I have had too many problems with disconnections while using ad-hoc mode to make it worth using.)
To power the Netgear WNCE2001 I use a Mophie Powerstation Gen 2, which works flawlessly.
I just plug the Netgear WNCE2001 into the ethernet port on the Nikon D4. I then plug the Netgear WNCE2001 into the Mophie Powerstation Gen 2 and push the button on the side to power it up. It works just like I have and ethernet cable directly connected. The speed is somewhat slower than with the ethernet cable connected, but it is very usable for photos.
What software do I use?
Well my favorite is Capture One Pro 7 you can check out my earlier post here. Capture One Pro 7 is updated and controls the Nikon D4 wirelessly, with ethernet, or USB. I also use Camera Control Pro from Nikon. (I did install the Wireless Transmitter Utility from Nikon, which is covered in the Nikon D4 manual. there is also a decent tutorial here) Capture One Pro 7 allows me to control the camera from either inside of Capture One Pro 7 or from the camera. This is much better than other applications which take over the camera and do not allow me to shoot as I normally would with camera in hand. It can be very frustrating to miss the perfect shot because you can't just take it because you have to run over to the computer to get the camera to fire.
Another piece of software that I use is onOne's DLSR Camera Remote Pro. This allows me to control the camera from an iPhone or with onOne's DLSR Camera Remote HD and iPad. The Ipad interface is the more usable of the two. It allows me to have Liveview video or still photos streaming to the iPad. I can see what the camera is seeing, focus, adjust settings and shoot or record - all from the iPad. It works really well for family portraits when the photographer has to be in the photo. One example view is shown at the bottom of the page here.
While the setup with Netgear WNCE2001 and Mophie Powerstation Gen 2 are much larger than the Nikon WT-5a, they are also much cheaper and can be used on any ethernet ready device. I may try the Nikon WT-5a sometime in the future when it drops in price to a more reasonable $300 or so.
(Another option is the D-Link DAP-1350)
Subscribe to:
Posts (Atom)


